Flow Pro Model S > Old Ride Board

Showing 1 to 4 (of 4)

#1.  Posted 10/02/2012 @ 22:59

Matt0206 Evening! I had a quick search to see if this has been asked before but couldn't see anything - apologies if I've missed something obvious. I've come into a pair of Flow bindings as well as an old Ride Control board but it looks like the two don't line up. Thought this might be the case and heard you can get compatible plates for the Flow bindings, anyone had experience with this? Is it as simple as getting a conversion plate or are the two just not compatible full stop? Any help much appreciated, Cheers TOP NEWQUOTEREPLY

#2.  Posted 11/02/2012 @ 01:29

In reply to post #1 ... Flinnster I guess what you are saying is that the Flows are a 3 screw system on the mounting plates, and they don't fit on the 2x4 grid of screw inserts on the board? Odd - I thought only Burton bindings had the 3 screw system? These might help, possibly? http://www.absolute-snow.co.uk/P/Flow_FOR_BURTON_AND_4_HOLE_BOARDS_Binding_Discs-(18703).aspx Revision #2 (Last edited: 11/02/2012 @ 01:34) TOP NEWQUOTEREPLY

#3.  Posted 11/02/2012 @ 07:10

In reply to post #2 ... Matt0206 Yeah the plates are 3 hole. Cheers for the link, stumbled upon these a while after posting and they look to be what I'm after. Cheers TOP NEWQUOTEREPLY

#4.  Posted 12/02/2012 @ 01:10

In reply to post #3 ... Flinnster Nice one! Hope they do the trick for ya! TOP NEWQUOTEREPLY

SHOW NEWEST POSTS FIRST