Are my Board and bindings compatible?

| Add a new Post...
Post By
  Thread Started By:   SamUk   On:   Sunday 14/03/2010 @ 22:24 Show Newest First    
SamUk
Posts: 10
Wiltshire
  #1  Are my Board and bindings compatible?  Posted 14/03/2010 @ 22:24
Hi all,

Ive just started out been getting lessons at Hemel and bought some K2 cinch CTL bindings off EBay also bought a 97 Burton Bullet

now the bindings came with 4 plates and 8 fixings 2 plates are Std and 2 off set so ive used the std but can only get 3 fixings in each binding at any one time


Is this alright?

Cheers

Sam
  Reload  Top
MiHill
Posts: 41
Wiltshire
  #2  Re: Are my Board and bindings compatible?  Posted 15/03/2010 @ 05:40
In reply to post #1 ...
yea dude so long as your bolts are nice and tight should be fine, try the disks in different positions incase you missed somethin tho...
Go forth and Shred!
www.freshtraxbc.com

AASI Level 1
CASI Level 2

Sticks:
DC MLF 156
Rome Artifact SK 150
  Reload  Top
sb60
Posts: 241
USA
  #3  Re: Are my Board and bindings compatible?  Posted 15/03/2010 @ 14:02
In reply to post #1 ...
Burton boards only set up with three screws. They just like to be different.
  Reload  Top
SamUk
Posts: 10
Wiltshire
  #4  Re: Are my Board and bindings compatible?  Posted 16/03/2010 @ 00:25
In reply to post #3 ...
thanks for the replys

I was worried that alough the burton board was set up for 3 fixings that the plates on the K2 would be evenly suported with only 3 in as its desinged for 4.

its all feels sturdy enough so im happy

Cheers

Sam
  Reload  Top
Subscribe using any feed reader!
  Featured Websites
  ScenePreston : Rider owned shop stocking Volcom, Vans, DC, Etnies, Nike SB, Adidas Skateboarding, Carhartt, Stussy and Obey
  Goomama : Goomama- Independent snowboard, skate & streetwear specialists in Salisbury, Wiltshire and online. Featuring brands including Volcom, Vans, Nike, Makia and much more!!
  More Mountain : Luxury Chalets in Morzine, France.
© 2001-2012 GONEboarding.co.uk